2K Plast primer
Ideal for internal and external hard plastic surfaces
The primer can be used on the following plastic types: polyurethane (PUR), polystyrene (PS), polyamide (PA), rubber polypropylene modified (EPDM), acrylonitrile butadiene styrene plastic (ABS), glass fiber reinforced plastic (GfK) and hard polyvinyl chloride (hard PVC).
The surface should be clean, dry and free of grease.
Protect the surroundings.
Shake for 2 minutes before use, spray a test piece.
Spray distance 25 – 30 cm.
Apply a maximum of 2 thin layers.
Machining temperature 15-25 degrees Celsius.
Without sanding, spray over after 10 to 15 minutes.
After use, the bottom is inverted on the can and sprayed for several seconds.