Gelcoat Filler is a white 2-component polyester-based filler. For minor damage to the gelcoat layer on e.g. boats, surfboards and plastic bodies. Also works well for damage to enamel and sanitary ware. The surface must be clean, dry and sanded. The substrate must be degreased with silicone remover both before and after sanding. Component A is thoroughly mixed with 2-3% component B. Mix for a maximum of 5 min. Spending. Must be applied in thin layers with steel or rubber filler. Best working temperature 20 ° C. Tools are cleaned with a thinner. After 1 hour, the surface can be sanded. With wet sandpaper, rubbing and polish, a shiny surface can be achieved
Read more about the product here: Technical datasheet – 230 – 2K Gelcoat Filler 0.2 Liter w hardener_TDS_EN
